Valves Automotive Carbon Cleaner / Gasoline Engine Cleaning System 0.7L Every Hour

Engine Carbon Cleaner Products Automotive Carbon Cleaner For Carbon On The Valves

HHO Carbon Cleaner Application:

1. As a car care product, it can be used for car engine carbon cleaning.

2. It can remove carbon deposits not only for gasoline cars, but also clean the diesel car.

3. It can clean carbon for many engine parts like combustion chamber, fuel system, converter and so on.

4. This machine can be used for many car care shops like car repair shops, 4S shops and car care centers.

5. It is suitable for the workshops personel and business man to do carbon cleaning service door to door.

Product Introduction:

As the long time driving, the car engine performance will be worst and worst for the carbon deposit increased in the engine system. This machine can help solve the problem and make good car performance like before. HHO Carbon Cleaner is a machine that can remove the internal carbon in the engine without using the chemical cleaning agent. There is Hydrogen generator for produce the mixture gases consist of Hydrogen and Oxygen(with a little steam), which will be sent into the engine part. And then the carbon deposit will be melted by the high temperature caused by the combustion.

Product Technical Data:

Product Using Steps:

• Turn on the power and select the operating mode.
• Insert the gas outlet pipe of the machine into the car engine intake manifold (air filter or brake vacuum tube).
• Start the vehicle and keep idling
• Setting the time of cleaning carbon(up to types of vehicles, usually 20 min),then click the start button on the control panel.
• When hearing the buzzing sound, the machine finished engine carbon cleaning.
• Turn off the power of the machine, then turn off the vehicle, pull out the gas outlet pipe in the end.
• Restore the car line.
• Start the car, step on the throttle at a constant speed until the speed is at 3000-3500 rpm and then release it,and do it again after 3 seconds. This was repeated 6 times. Until the moisture and dirt in the exhaust pipe are discharged, the carbon removal is finished.